ORGANIC BEER RECIPES
Organic 7 Bridges Red Ale
A medium bodied light amber ale, with a balanced, moderate hop bitterness
Ingredients for 5 gals:
7 1/2 lbs. Briess organic pale 2-row malt
1 1/2 lbs. Briess organic Munich malt
1 lb. Briess organic caramel 60 oL malt
1/4 lb. Briess organic caramel 120 oL malt
1/8 lb. Briess organic chocolate malt
1/2 oz. Organic New Zealand Pacific Gem hop pellets- bittering (34 IBU)
1 oz. Organic American Cascade hops- flavor (6 IBU)
1 oz. Organic New Zealand Hallertaur hops- aroma
Ale Yeast: Wyeast # 1056 American Ale or White Labs #001 California Ale
For bottling: 1 1/4 cups Organic Dry Malt Extract (DME)*
Optional ingredients: 1/2 teaspoon Irish Moss
International Bittering Units (IBU’s): 40
Original Gravity (O.G.): 1.048- 1.052
Final Gravity (F.G.): 1.010-1.016
Average alcohol content (% by volume): 5%
*If you prefer, you may use 1 cup of organic malt extract or 3/4 cup corn sugar (not included in this kit), or kraeusen with 1 quart of unfermented organic beer (see brewing tip: Kraeusening your beer) for bottling.
For expanded directions, go to brewing procedures for all grain recipes.
1a: Heat 3 1/2 gallons of water to 160- 165 oF, then turn the heat off. Add the grains (or grain bag with grains in it) and stir well. The temperature should be 150 oF. Adjust the temperature if necessary by adding heat, hot water, or cold water.
1b: Allow the grains to soak for 40 to 60 minutes at 150 oF. Do a starch test to see if the mash is done (see virtual class for details).
2: Heat 3 1/2 gallons of water to 170 oF in a separate pot. Sparge the grains with this water when the mash is complete
2b: Add water to the liquid collected from the grains to make up to 5 1/4 gallons.
3. Bring the wort to a boil.
4. Once the wort has reached a rolling boil add 1/2 oz. New Zealand Pacific Gem hop pellets (bittering) and boil for 40 minutes.
5. Add 1 oz. American Cascade hops (flavoring). If desired, add the Irish Moss flakes. Boil for 15 minutes more.
6. Add 1 oz. New Zealand Hallertaur hops (aroma), boil 5 more minutes, & turn the heat off.
7. Cool the wort to 65- 75 oF.
8. Transfer the chilled wort into your sanitized primary fermenting vessel.
9. Shake or stir (with a sanitized spoon!) the unfermented beer vigorously to add oxygen.
10. Add the yeast and ferment in a cool dark place for 4-6 days at 60- 70 oF in the primary fermenter.
11. If you have a secondary fermenter, transfer the beer to it when fermentation activity has subsided (after 4-6 days). This step is optional.
12. Ferment for an additional 7- 14 days, or until fermentation is complete.
13. Clean and sanitize enough bottles for your batch.
14. Boil your bottling sugar in 2 cups of water for 15 minutes. Cool the sugar solution to 70 oF and pour into a sanitized carboy or bottling bucket. Transfer your beer into the same container and mix slowly. You can also pour the sugar solution into the same fermenter with the beer instead of transferring.
15. Use a racking cane and siphon tubing with a bottle filling tip attached to fill your bottles. Cap immediately after filling the bottles to prevent contamination.
16. Store the beer at room temperature (about 70 oF) for the first few days, then in a cool dark place (55- 65 oF) for 1-3 weeks. Your beer is ready to drink when it is clear and nicely carbonated.
Home Shop Brew Tips Recipes How to Brew Contact Us Order Privacy
© 1997- 2005 Seven Bridges Cooperative